Write a Review

Low And Lean Made from super-strong 6061-T1 aluminum, the double concave body is sleek and light while still giving your foot a nice wide platform to stand on. Round And Round We Go Fully sealed 4-bearing design makes for smooth rolling rotations over an extremely long life. And the ability to rebuild makes it nearly unkillable. Ride Don't Slide Pins at the front and back of the pedal are angled slightly to provide improved traction and foot comfort. Because pedal bites suck. Look Good Ride Good Our top of the line pedals come in 6 different colors so that you can add as much flavor and flair to your ride as you like. Pedal Envy More than just a trusty platform for stomping landings and railing around berms, the Atlas Pedal has long been Race Face's top contender. It's strong, thin, concave, lightweight, rebuildable, and ideally suited for getting wild in the woods. Specs: - Axle Material: Chromoly Steel - Body Material: 6061 Aluminum - Material: 6061 Aluminum - Platform Height (MM):14.5 - # of Pins: 20 SHCS hex traction pins per pedal (10 per side) - Platform L x W (MM): 114 x 101 - Weight: 355g

M21 rear derailleurs are designed to work with 6- and 7-speed Shimano road and mountain shifters. Enjoy the wide variety of bikes you can get going again with M21 rear derailleurs. - Robust composite and steel construction - Compatible with Shimano 6- and 7-speed mountain and road systems

Introducing the DropTop; our next locking bike fork mount that grows upon years of feedback and use. The DropTop utilizes a TPU overmolded shim to allow for both 12mm and 15mm axles to fit without the need for switching shims out. It is based upon the same clamshell design as the DriveShaft series, which allows for easy loading and adapts to minor differences in axle diameter or contouring. The DropTop also includes mounting holes for both horizontal and vertical mounting orientations, it replaces both the DriveShaft HM and DriveShaft Track Mounts. - The only locking thru-axle track mount for truck and van tracks - Compatible with 12mm, 15mm, & 20mm thru axles up to 110mm wide (for 20mm, shims must be removed) - Vertical and horizontal mounting positions - TPU overmolded shim eliminates the need to switch out shims for 12mm or 15mm axles - Anti-Theft: TPU surface provides sufficient friction to stop the axle from being removed when DropTop is firmly clamped and locked - Can fit QR bikes with our 9mm QR with Dummy Axle - sold separately - Wide mouth opening to easily load your bike and a locking T-Bolt that adjusts for a tighter hold so the thru-axle cannot be removed when locked - Carries 1 bike, up to 45 lbs - Lock core, keys, and Track Hardware Included - For 9x100mm quick release or bolt on axles only, you can use the Dummy Axle with your DropTop. Fitment Note: Due to the nature of the DropTop clamp not bracing the fork legs outward, there will be play when used with Mavic Speed Release and Specialized 12mm forks with an oversized non threaded fork leg. For those instances, please use a HotRod instead Fitment Note: DropTop is NOT compatiblle with Lefty fork mount from Cannondale. RockyMounts does not have a compatible mount for Lefty at this time.

The Beetle 6 is a larger version of the BiKASE Beetle that has been stretched to accommodate the iPhone 6/6S Plus and other large mobile phones. Storage space underneath phone compartment for energy bar, wallet, keys, or tools. Mounts securely to the top tube using Velcro straps and shock cord around stem. - Pocket fits iPhone 6/6S Plus and other larger smart phones - Clear cover allows device visibility and operation - Mounts to top tube or stem - 2 multi positional straps & shock cord for mounting - Internal lastic stiffener and anti-slip fabric bottom - dual zippers - 8" x 4" x 2"

All of our Crew cuff socks are perfect for riding your bike on or off the road. We all know that. But they aren't just for riding. They are great for hiking, skating, boarding, on the lacrosse field and at work or just chillin'. They can be worn anywhere anytime. Put a pair on today and your feet will be happy and look fantastic! Like our entire line of performance socks, all of our crew socks are purpose-built and functionally fashionable. They include our "Stretch-to-Fit" sizing system and our exclusive "Easy-fit" cuff for a perfect fit every time on any foot. These features create superior softness and comfort to help eliminate blisters and hot spots. We also feature a double stitched heel & toe for added strength and durability. - Cuff Height : 6" - Made with : Micro-Denier Acrylic - Style : Flat-knit; Standard

Continental's Gatorskin combines 3 flat-protection technologies into one fast-riding, high-mileage racing and training tire. It features a super-fine 180 thread-per-inch casing, a bead-to-bead layer of DuraSkin, and is finished with a Kevlar-reinforced top layer. The result is a light tire that rolls and corners with the best of them while providing flat protection second to none. - Weight: 290/310/360/365/390 grams (23c/25c/28c/32c/27 x 1 1/4) - PolyX puncture protection - DuraSkin sidewall protection

The MET Roam MIPS is designed for all-mountain and enduro riding. The back of the head and the temples are especially in need of protection from impact, so we’ve increased the coverage around these key areas, without sacrificing the helmet’s light weight. The injection-molded visor is flexible to adapt to the shell of the helmet in a crash. This unique feature helps to manage extra rotational forces transferred to your neck. There are clips on the visor and a rear edge, which keep goggle straps in place during the ride, achieving ultimate compatibility with your eyewear. Featuring the MIPS-C2 rotational management system, the Roam is able to slide against the head in the case of a crash, redirecting damaging rotational motion. The MIPS-C2 solution separates the shell and the liner with a thin plastic Low Friction Layer (LFL). The Roam Mips features 22 vents that work together with the purpose-built internal channel to provide optimal airflow at high and low speed. The MET Roam has also been rewarded for its comfortable fit. The inner padding has an extended surface area which provides the perfect stability without disturbing internal airflow. - In-mold polycarbonate shell with EPS liner - Fully polycarbonate wrapped EPS liner enhances durability - Extended head coverage for more thorough head protection - Exceptionally comfortable and secure on the head thanks to a refined internal shape and stabilizing inner padding - MIPS-C2 Brain Protection System offers extra protection in the case of certain impacts - MET Safe-T Orbital Fit System - The 360° head belt with vertical and occipital adjustments help to maximize adjustability - The injection-molded visor is adjustable and flexible to avoid extra rotation of the neck in case of a crash - Integrated goggle strap clips and sunglass ports to securely dock eyewear when climbing or resting - 22 vents are internally engineered for air channeling to improve ventilation and comfort - Certifications CE; AS/NZS; US Sizing: - Small = 52 – 56cm - Medium = 56 – 58cm - Large = 58 – 62cm

Ride to work, ride for your health, get away from it all with a weekend adventure. Here's a bike that does all of the above. With its comfortable positioning and smooth ride quality, Escape is the way to go. With its lightweight ALUXX aluminum frame, confident handling, and fast-rolling 700c wheels, Escape lets you ride any road or path in comfort and style. It's a great choice for commuting, fitness riding, or just for fun. This versatile all-rounder is designed with a flat handlebar and upright rider position, which gives it a confident, sporty feel that's suitable for city streets or country roads. It also comes with rack and fender mounts so you can add accessories to make it fit your needs. Balanced and efficient Lightweight ALUXX frame, smooth-rolling 700c wheels, and confident upright positioning offer a balanced, efficient ride quality. Versatile and capable A wide range of gears helps you increase your speed and tackle hills with more control. Rugged reliability Puncture-resistant tires and integrated rack mounts keep you rolling on tough city streets and more adventurous rides.

FX 2 Disc is a stylish and versatile hybrid bike with disc brakes that let you stop on a dime and ask for change, even when the weather isn't cooperating. Train, commute, or ride for fun with the lightweight Alpha Gold Aluminum frame, 18 speeds, and semi-skinny tires that are fast on the road and stable on loose terrain. It's right for you if... Raining cats and dogs? That doesn't keep you from riding. You want a high-value hybrid bike with the superior all-weather stopping power of disc brakes, plus a lightweight frame and quality parts that will hold up over time. The tech you get A lightweight aluminum frame with hydraulic disc brakes for all-weather stopping power, a Shimano drivetrain with 18 speeds and a wide range of gearing so you're never pedaling too hard or too soft, and mounts that make it easy to accessorize your ride! The final word FX 2 Disc is a go-anywhere hybrid bike with parts that perform on training rides, trips to the market, or your morning commute. It has endless options for accessories, but what really sets this model apart is the disc brakes, which provide great stopping power in all weather conditions. Why you'll love it - More confident braking means bad weather doesn't have to keep you from enjoying your ride - It's versatile and does whatever you want it to do, whether that's riding for fitness, commuting, or cruising to the farmer's market to pick up groceries - It's easy to accessorize with racks, a kickstand, fenders, lights, and more! - Like every Trek hybrid, it's backed by a lifetime warranty and supported by a wide network of retail partners - The cables are routed internally, which protects them from the elements and adds to the bike's sleek look

Simple and effective design for clean and clog-free sealant injection. - 2 oz injector with highly bendable top hose and rigid bottom hose - Valve core tool included (Presta and Schrader valves) - Compatible with a wide variety of sealants

Z7 is a basic, affordable replacement chain for use on 6 and 7 speed bikes. - Features inner plate chamfering to smooth shifting - Z-bridge shape

FX 2 Disc Stagger is a stylish and versatile hybrid bike with a classic stepthrough frame geometry that's easier to mount and dismount. Train, commute, or ride for fun with the wide range of speeds, reliable disc brakes that let you stop on a dime, and loads of mounts for accessories. It's right for you if... You want a single bike you can use for fitness rides, commutes, and cruises, and you value the confidence that comes from the superior all-weather stopping power of disc brakes. The tech you get A lightweight aluminum frame with stagger geometry that's easier to mount and dismount, hydraulic disc brakes for all-weather stopping power, a Shimano drivetrain with 18 speeds and a wide range of gearing so you're never pedaling too hard or too soft, and mounts that make it easy to accessorize your ride! The final word FX 2 Disc Stagger is a stylish, versatile hybrid bike that performs on training rides, trips to the market, or your morning commute. It has endless options for accessories, but what really sets this model apart is the disc brakes, which provide great stopping power in all weather conditions. Why you'll love it - The stepthrough frame makes it easy to hop on and go, and hop off when your ride is over - More confident braking means bad weather doesn't have to keep you from enjoying your ride - The cables are routed internally, which protects them from the elements and adds to the bike's sleek look - It's easy to accessorize with racks, a kickstand, fenders, lights, and more! - Like every Trek hybrid, it's backed by a lifetime warranty and supported by a wide network of retail partners

- Dust-proof and waterproof rubber seal cover. - Protect the power source connection on the frame when the e-bike is parked outside or when you carry it without the EnergyPak.

- Urban/recreational tire with shallow, grooved tread for multiple conditions - Size: 26 x 1 3/8 - ISO 590

- Flexible mesh back - Adjustable TPR strap - Three-panel palm - DOT-embossed palm material for added grip - Gel-padded palm - Microfiber nose wipe

For extreme conditions, you need an extreme lube. That's when you grab Finish Line's Wet Lubricant. It's ultra water-resistant and long-lasting thanks to its special formulation of synthetic oils, special polymers and anti-wear additives. This lube delivers superb drivetrain lubrication and protection and it's the ultimate choice for muddy off-road rides, all-day epics and long, rainy commutes. - Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives - Will require more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection - Upon application, wipe excess off chain to minimize attraction of dirt and grime - Finish Line's Wet Lubricant delivers the ultimate in lubricity and protection. It requires a little more attention to drivetrain cleanliness compared to Finish Line's Dry or Wax lubes.

Get a feel for the trail with this all-new aluminum hardtail made for aspiring singletrack riders. It features stable, fast-rolling 29-inch or more-playful 27.5-inch wheels so you can push the pace on climbs and let loose on the descents. Built on a new lightweight ALUXX aluminum frame that features classic hardtail design plus the balanced riding characteristics of either larger diameter 29-inch or 27.5-inch wheels, Talon is a great choice for XC or light trail terrain. The frame geometry is specifically designed to adapt to its respective wheel size and either an 80mm or 100mm suspension fork (depending on frame size). It's a confident ride that's perfect for ambitious riders who want to take their off-road skills to the next level. Proven alloy performance ALUXX aluminum frameset is hand-built in-house by the world leader in aluminum engineering. Balance and stability Frame geometry is designed to optimize the balance and roll-over capabilities of 29-inch wheels or the liveliness of 27.5-inch wheels (depending on frame size). XC control Suspension fork offers either 80mm or 100mm of smooth travel for added XC control. Wheel size: Sizes X-Small – Medium: 27.5-inch Sizes Small – X-Large: 29-inch

From parkways to paths, paved roads or dirt, this versatile flat-bar bike can help you reach new fitness goals or add some spice to your daily commute. KEY PERFORMANCE FACTORS All-terrain versatility With a mountain bike style flat handlebar, suspension fork and disc brakes, you can ride road or dirt with confidence. Lightweight and durable Frameset constructed with high-quality ALUXX aluminum. Comfort and stability Frame geometry puts the rider in a position that balances efficiency with stability on rough roads, paths or trails. Wheel size: Sizes XX-Small – X-Small: 26-inch Sizes Small – X-Large: 27.5-inch

Everyday helmet that works for everyday kids who just want to hop on their bike and ride. Protection for your pint-sized cyclist The Tyro is a dedicated children's helmet packed with the same performance and comfort found in adult helmets. A Fidlock magnetic buckle lets kids secure the chin strap easily, and an easy-to-adjust rear dial conforms to a wide range of head sizes. Product details: - In-molded EPS shell with additional rear coverage for protection and durability - Fidlock magnetic buckle fastens effortlessly for a quick, secure, kid-friendly fit - Dialed fit system provides a secure and comfortable fit - Soft, comfortable, moisture-wicking, and washable helmet pads - Adjustable helmet straps provide a clean look and easy fit management - Crash Replacement Guarantee provides a free helmet replacement if involved in a crash within the first year of ownership - Helmet meets ASTM standards—their tests use a smaller mass headform more realistic to younger riders - Complies with U.S. CPSC safety standards for bicycle helmets for persons age 1 and over Features: Additional coverage An in-molded EPS shell along with additional rear coverage provides assurance for the unexpected. Fidlock magnetic buckle A Fidlock magnetic buckle fastens effortlessly for a quick, secure, kid-friendly fit. Simply move the two ends close to each other and watch as they magically connect. Dialed fit A dialed fit system provides a secure and comfortable fit with a wide range of adjustability. Fresh pads Soft, comfortable, moisture-wicking pads provide instant and maintained comfort and are also removable for cleaning.

Ergon's GA2 All-Mountain / Gravity grip has superb tactile feel thanks to a super-soft, UV stable rubber compound exclusively developed and manufactured in Germany for Ergon. The ergonomic shape requires less rider grip pressure while specific grip zones matched to the shape of the hand increase tactile feedback and traction. The inner construction varies in thickness to allow greater damping, which results in less ulnar nerve stress. The inboard aluminum clamp holds grips securely, allows even more grip area at the end of the bars, and makes these grips carbon-bar friendly.

SRAM's 1170 11-Speed Cassette is constructed of light, durable materials and boasts SRAM's PowerGlide tooth profiles and shift ramps for quick, positive gear changes. This excellent cassette also sports a semi-spider construction for a maximum stiffness-to-weight ratio, a lightweight aluminum lockring, and is available in three ranges to suit all your riding.

From bikepacking and gravel grinders to everyday adventure rides and group trekking, devote advanced has what it takes to stir your backcountry desires. Available Fall 2022 KEY PERFORMANCE FACTORS Lightweight Durable ALUXX-Grade Aluminum with Advanced-Grade Composite fork to damp vibration from chattery roads. Adventure-Ready With clearance for 45c tires and mounts for racks, accessories and three water bottle cages, this bike meets the demands of your next epic ride. Smooth Operator Internal cable routing and D-Fuse seatpost and handlebars keep this gravel bike clean and contoured for vibration-damping comfort and less maintenance.

The CST Decade was designed for flatland BMX riding. - Smooth tread profile with no knobs to interfere with your feet while performing tricks

The MET Parachute MCR is MET's convertible full-face helmet developed for enduro, all-mountain and e-MTB riding. Parachute MCR is designed to be truly two helmets in one. The full-face has a stylish and aggressive look providing all-round protection, while the open face reflects the style of MET's all-mountain helmets. MCR stands for Magnetic Chinbar Release and instantly converts from full to open face helmet and back. MCR is MET's revolutionary system created in partnership with Fidlock. Featuring the MIPS brain protection system and complying with ASTM 1952-15/2032-15 (shell and chinbar), riders have the highest level of protection from linear and rotational impacts. In addition, MET's unique flexible injected visor to avoid extra rotation of the neck in case of a crash. The BOA FS1 offers incremental adjustment forward and backward to deliver a precise and adaptable fit, while the belt runs 360° around the head to avoid any pressure points, optimizing comfort. It also offers 3 positions for vertical adjustment. 21 vents and the MET engineered internal air channeling work in synergy with the breathable chinbar to maximize the airflow at low and high speed. The chinbar is engineered to reach the optimal balance of stiffness and energy dissipation to give riders confidence when wearing the Parachute MCR. - In-mold polycarbonate shell with EPS liner - MCR Magnetic Chinbar Release System allows the helmet to easily convert from a full face to open face design - MIPS C2 rotational management system is engineered to add protection in case of certain impacts - ASTM 1952-15/2032-15 certified shell and chinbar provides additional safety - The injection-molded visor is adjustable and flexible to avoid extra rotation of the neck in case of a crash - Breathable chinbar is covered with a durable injected PU foam - Removable cheek-pads (2 sizes included) allow you to achieve the perfect fit - BOA-FS1 Fit System with 360° head belt and vertical adjustments offer a customized fit - Fidlock Magnetic Buckle makes it easier to secure the helmet - 21 vents are internally engineered for air channeling to improve ventilation and comfort - Certifications: CE; AS/NZS; US Sizing: - Small = 52 – 56cm - Medium = 56 – 58cm - Large = 58 – 61cm

It might look normal from the outside, but the engineering inside this incredible chain design is anything but normal, and it makes possible a gear range previously found only in 2-chainring drivetrains. And it’s also the biggest contributor to the Eagle drivetrain’s ultra-smooth, precise, durable and quiet performance. The Eagle chain’s links have a smooth radius, with no sharp edges or chamfers, which yield a significant reduction in noise, friction and wear on chainrings and cassette cogs. This design also allows for a flatter plate, which means more consistent chain riveting and greater overall strength. HARD CHROME technology extends the chain’s optimal performance life.

Everything you need to tap into the pure and simple joy of riding a bike. With its comfortable rider position, 8-speed gearing and wide, smooth-rolling tires, Vida will get you spinning with a smile on your face. It has disc brakes for smooth stopping power, plus a comfortable saddle and grips.

Choose a route, any route. With its all-road capabilities and smooth, natural pedaling support, Roam E+ helps you ride smooth roads, rough roads, bike paths, or trails. It's fun, easy, and ready to roll. Engineered with a lightweight ALUXX aluminum frameset and a new SyncDrive Core motor, Roam E+ is all about versatility. Blending the best qualities of a mountain bike and a road bike, it encourages you to explore more adventurous routes. It comes with wider tires and a 63mm suspension fork so you can comfortably ride rough roads or paths. Make the rough roads feel a little smoother and the hard climbs a little easier with the do-it-all Roam E+. All-road capabilities - Powerful SyncDrive Core motor, light and durable ALUXX aluminum frame, and wider tires give you the ability to ride any road, any route. Comfort and control - 63mm suspension fork and wider tires improve comfort and control on rough roads or paths. Longer range - Long-lasting EnergyPak 400 battery allows you to ride farther without running out of power.

Proper alignment starts here Bontrager inForm BioDynamic insoles with Superfeet are engineered to harmonize the interface between body, shoe, and bike, giving you the complete foot support you need to ensure mile after mile of pain-free pedaling. Models are color-coded: - Red = Low Arch - Yellow = Mid Arch - Blue = High Arch - Engineered for unparalleled foot control, pedaling efficiency, and comfort - 3D Arch Pillar provides optimal arch support for improved knee alignment - Precision molded heel cup helps stabilize and align the foot - Footrest metatarsal pad helps reduce or eliminate hot foot - inForm BioDynamics—Optimizes natural movement for sustained, higher performance

The Mirrycle Jellibell is a fun way to let pedestrians and other riders know you're coming! The Jellibell has a see-through top so you can see the gears spin as it rings. It's weatherproof, too! - Dome Diameter: 48mm (1.9") - Fits handlebars with 21mm – 22.5mm (.83" – .89") outside diameters

The Minion DHF has become the benchmark for riders wanting maximum control in loose and muddy conditions. - Directional ramped center knobs provide low rolling resistance - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium, wet